ST11G - 1.5KW / 380V, ST9G - 1KW / 220V, ST9G - 1.5KW / 415V ESP
Controller Tubular Electric Heater
Ash bucket electric heater is used inside ESP ash hopper, to
prevent the ash hopper ash condensation and harden , in order to
ash difficult . Its working principle is put metal wire resistance
in to a metal pipe . and in the gap part tightly filled with good
thermal conductivity and dielectric properties of magnesium oxide
from. It can be bent into any desired form , Installed in the air
channel, Used for heating the air , it can also be immersed in
water or other liquid is used for heating water or other liquids ,
and placed directly on the solid metal heating metal , It has the
advantages of simple structure, high thermal efficiency , good
safety, durability and light, at present in our country has all
kinds of industry equipment in use . Products fit to technical
requirements of TB/T2379-93.
Cathode ceramic shaft electric heater
ash bucket electric heater
insulator compartment electric heater
Porcelain electric heater
Porcelain insulator electric heater
Casing tube electric heater
T4.1.9B,ST9G-1KW/220V ,ST9G-1.5KW/220V ,ST11G-1.5KW/220V
ST9G-1KW/380V,ST9G-1.5KW/380V ,ST11G-1.5KW/380V ,ST9G-1KW/415V
,ST9G-1.5KW/415V ,ST11G-1.5KW/220V,ST11G-1.5KW/380V
ST11G-1.5KW/415V
Model: FT11G/ST11G
Working voltage: 380V
Power: 0.5KW-10KW
Insulation resistance: 10M
Dielectric strength: 1000V
Unit: KW
Outline dimensions: 500X720X16
Temperature range: 0-450
Use: Heater
Weight: 10KG
Maximum heating weight: 8KG
Continuous service life: 100000H
Electric heating tube
A heat pipe is a heat-transfer device that combines the principles
of both thermal conductivity and phase transition to effectively
transfer heat between two solid interfaces.
At the hot interface of a heat pipe a liquid in contact with a
thermally conductive solid surface turns into a vapor by absorbing
heat from that surface. The vapor then travels along the heat pipe
to the cold interface and condenses back into a liquid – releasing
the latent heat. The liquid then returns to the hot interface
through either capillary action, centrifugal force, or gravity, and
the cycle repeats. Due to the very high heat transfer coefficients
for boiling and condensation, heat pipes are highly effective
thermal
conductors.
| Product Information |
| Materials | SS304,SS316 | Power tolerance | +5%, -10% |
| Pipe diameter | 10mm,12mm,14mm,16mm | Size tolerance | ±5mm |
| Heater length | 200mm,300mm400mm,500mm | Cold pressure capacity | 1500 W/0.5mA/S |
| Watt | 1000-5000W
| Hot pressure capacity | 1250 w/0.5mA/S |
